1. Seat Belts
2. Steering
3. Brakes System (inc. ABS)
4. Suspension
5. Tyres
6. Rear View Mirrors
7. Lights
8. SRS Supplimentry Restraint System (Air Bags)
9. Instrument Cluster
Restraint Systems Front and Rear.
Make: Mini Model: Cooper S Year: 2004 Body Type: Hatchback
Fuel Type: Petrol Aspiration: Supercharger Vehicle Class: S
History: Import Odometer: 097,306 Rego: FYT101 W.O.F. Exp: 18/4/12
Type of Seat Belts: Front - 2 x Lap & Diagonal Dual Sensor Type Back - 2 x Lap & Diagonal Dual Sensor Type & 1 x Lap Belt
Pretensioners fitted: Yes, pretensioners use a preintalled strong coil spring or gas chamber with piston. It uses the energy stored in the strong coil spring or gas shock that is released in an accident to tighten the seat belt.
Front:
TONGUE & BUCKLE ASSEMBLY
*Check the engagement of tongue and buckle. Pass
*The tongue and buckle should securely latch
together with very little free play. Pass
*The tongue should eject actively when released. Pass
*There should be no visible cracks on the buckle and the buckle cover must be intact. Pass
*The tongue should have no metal deformation, webbing marks or visible cracks on metal or plastic sections. Pass
RETRACTOR
*Pull the belt out as far as it will go, then release it. Pass
*The belt should return all the way to the retractor without sticking, gripping or stalling. Pass
*The retractor should lock if the webbing is pulled out suddenly. Pass
WEBBING
*The webbing should be securely attached to its end fittings and displaying no stretching or pulled stitching. Pass
WEBBING
*The webbing should be securely attached to its end fittings and displaying no stretching or pulled stitching. Pass
*The webbing should be flat throughout its entire length. Pass
*Look for plastic burn marks, frayed stitching and any signs of rippling. Pass
*Look for fading – exposure to sunlight can reduce the strength by up to 50%. Pass
ANCHORAGE
ANCHORAGE
*Ensure all anchorages are free from corrosion and are securely fastened to the vehicle structure. Pass
*All mounting points should not show any signs deformation. Pass
Rear:
Rear:
TONGUE & BUCKLE ASSEMBLY
*Check the engagement of tongue and buckle. Pass
*Check the engagement of tongue and buckle. Pass
*The tongue and buckle should securely latch
together with very little free play. Pass
*The tongue should eject actively when released. Pass
*There should be no visible cracks on the buckle and the buckle cover must be intact. Pass
*The tongue should have no metal deformation, webbing marks or visible cracks on metal or plastic sections. Pass
RETRACTOR
*Pull the belt out as far as it will go, then release it. Pass
*The belt should return all the way to the retractor without sticking, gripping or stalling. Pass
*The retractor should lock if the webbing is pulled out suddenly. Pass
WEBBING
*The webbing should be securely attached to its end fittings and displaying no stretching or pulled stitching. Pass
WEBBING
*The webbing should be securely attached to its end fittings and displaying no stretching or pulled stitching. Pass
*The webbing should be flat throughout its entire length. Pass
*Look for plastic burn marks, frayed stitching and any signs of rippling. Pass
*Look for fading – exposure to sunlight can reduce the strength by up to 50%. Pass
ANCHORAGE
ANCHORAGE
*Ensure all anchorages are free from corrosion and are securely fastened to the vehicle structure. Pass
*All mounting points should not show any signs deformation. Pass
Supplementary Restraint System
Type of Seat Belts: Front - 2 x Lap & Diagonal Dual Seat Belts
Rear - 2 x Lap & Diagonal Dual Seat Belts and 1 x Lap Belt
Air Bags (No.): Front - 1 Rear - 0 Side - 0
Dash warning light working: Yes
CHECK AREAS:
Rear - 2 x Lap & Diagonal Dual Seat Belts and 1 x Lap Belt
Air Bags (No.): Front - 1 Rear - 0 Side - 0
Dash warning light working: Yes
CHECK AREAS:
Vehicle Identification.
Vin and chassis number - Pass
Vehicle Exterior
Structure - Pass
Vehicle Structure.
External projections - Pass
Lighting
Headlamps - Pass
Front and rear fog lights - Pass
Cornering lamps - Pass
Daytime running lamps - Pass
Direction indicator lamps (front) - Pass
Direction indicator lights (rear) - Pass
Forward-facing position lamps - Pass
Rearward-facing position lamps - Pass
Stop lamps - Pass
High-mounted stop lamps - Pass
Rear registration plate lamp - Pass
Rear reflectors - Pass
Reversing lamps - Pass
Non-specified lamps - N/A
Vision
Windscreen - Pass (small stone chip)
Other glazing - Pass
Sun visors - Pass
Wipers - Pass
Washers - Pass
Rear view mirrors - Pass
Entrance and Exit
Door and hinged panel retention system - Pass
Vehicle Interior
Vehicle Interior
Seats and Seat anchorages - Pass
Head restraints - Pass
Seatbelts and seat belt anchorages - Pass
Airbags - Pass
Interior impact - Pass
Speedometer - Pass
Audible warning device - Pass
Brakes
Components - Pass
ABS self check - Pass (brake pad wear light on)
Service brake performance - 20% or less is passable
Service brake balance - Front: 2% Rear: 2%
or LF: 442 RF: 450 LR: 178 RR: 175
Parking brake performance - 5%
or LRH: 143 RRH: 150
Steering and Suspension
Steering mechanism - Pass (needs slight tightening)
Suspension mechanism - Pass
Tyres, Wheels and Hubs
Tyre condition - Pass (camber wear on the right rear tyre)
Tread depth - Pass (1.5mm or more is passable)
Left front - Pass (6mm)
Right front - Pass (6mm)
Left rear - Pass (6mm)
Right rear - Pass (3mm)
Spare wheel security - N/A ( runs flat tyre limp home)
Space-saver tyre label - N/A
Wheels Hubs and axles - Pass
Mudguards - Pass
Exhaust
Exhaust System - Pass
Towing Connections
Towing connection - N/A
Miscellaneous Items
Engine and drive train Fuel tank and fuel lines - Pass
Alternative Fuels
Alternative fuels system in working order - N/A
Alternative fuels inspection certificate current - N/A
Alternative fuels system safe - N/A
Modified Vehicle
Valid LVV plate, declaration or authority card - N/A
Valid LVV plate, declaration or authority card - N/A
No comments:
Post a Comment